Critical Power: Emissions Regulations and Technologies

 
 100% 
Critical Power: Standby power for mission critical facilities
Thursday, May 9, 2013, at 11 a.m. PT /1 p.m. CT/2 p.m. ET
1 AIA CES accredited LU available for attendees

Mission critical standby systems provide power to critical operations power systems (COPS) for public safety, national security, or business continuity reasons. Electrical equipment and wiring that serve these designated critical operation areas must remain operational during a natural or man-made disaster. The National Electrical Code (NEC) describes the engineering practices for mission critical facilities, which go beyond the requirements for emergency and legally required standby systems. In addition to specific code requirements, design engineers as well as authorities having jurisdiction must know the requirements for the installation, operation, control, and maintenance of standby power for mission critical facilities.

Learning objectives:

• The audience will understand the applicable codes: NFPA 70: National Electrical Code, Chapter 7 and NFPA 110: Standard for Emergency and Standby Power Systems
• Attendees will learn how emergency systems, legally required standby systems, optional standby systems, and critical operations power systems (COPS) differ
• Viewers will understand generator sizing and loading requirement differences for emergency, legally required standby, optional standby, and COPS
• Viewers will learn the power distribution requirement differences for emergency, legally required standby, optional standby, and COPS.

Speakers: Kenneth Kutsmeda, PE, LEED AP, engineering design principal, KlingStubbins, Philadelphia
• Kenneth Kutsmeda is an engineering design principal at KlingStubbins in Philadelphia. For more than 18 years, he has been responsible for engineering, designing, and commissioning power distribution systems for mission critical facilities. His project experience includes data centers, specialized research and development buildings, and large-scale technology facilities containing medium-voltage distribution.

Danna Jensen, PE, LEED AP BD+C, associate principal, ccrd partners, Dallas.
• Danna Jensen has 12 years of experience at ccrd in Dallas, where she became associate principal in 2012. Most of her work consists of designing electrical distribution for hospitals. She also designs electrical systems for office and retail facilities. She is the project manager for major hospital projects, which includes knowledge of all mechanical, electrical, plumbing (MEP), and fire protection systems, as well as commissioning. Jensen was a 2009 Consulting-Specifying Engineer 40 Under 40 winner and is a member of the Consulting-Specifying Engineer Editorial Advisory Board.

Moderator: Jack Smith, Consulting-Specifying Engineer, Pure Power, and CFE Media LLC
Sponsored by:
Image as described above
*
1. Please fill out the following:
*
2. Please fill out the following:
*
3. Additional Information
*
4. Which of the following best describes your company?
*
5. Check the three types of buildings for which you most frequently design, specify, or procure products:
Webcast registration policy: The participation of our sponsors in this Webcast enables us to provide this event free of charge to our registrants. Part of the value we are able to provide our sponsors is information they can use to more effectively market their products and services. Accordingly, by agreeing to register for this event, you agree that we may share your registration information with our sponsors. We do not permit these companies to use your personally identifiable information without your permission for any purpose other than to send you information about their own products and services. Read the entire Privacy Policy click here.