CSE Webcast 8-18-11

Selective Coordination for Generators and Transfer Switches

Thursday, August 18 at 2 p.m. EDT/1 p.m. CDT/11 a.m. PDT

Selective coordination of generators and transfer switches requires calculations and careful consideration of equipment specifications, especially the withstand ratings of the automatic transfer switches, and when to choose 3 cycle ATS or 30 cycle ATS. Not only are considerable costs on the line, but potentially, the health and safety of lives, especially in hospitals.

Part 1: Fundamentals of how to selectively coordinate generators and automatic transfer switches.

Part 2: Examples and more detailed guidance on selective coordination of hospital systems, including what's currently required by codes and standards.

-Jim Ferris, PE, Electrical Project Engineer, TLC Engineering for Architecture, Orlando, Florida
-Dean Eriksen, PE, LEED AP, Principal and Project Manager, Affiliated Engineers, Inc., Seattle, Washington
-Michael Ivanovich, President and Moderator, Ivanovich, The Ivanovich Group LLC

This event is free and learning units are granted upon successful completion of a post-event exam.

Image as described above
1. Register for the CSE Webcast covering "Selective Coordination for Generators and Transfer Switches"
2. Additional Information
3. Which of the following best describes your company?
4. Check the three types of buildings for which you most frequently design, specify, or procure products: