MOM600 VIDEOS QUIZ
Assembly, Folding & Packing

Question Title

1. To properly install the MOM600 raft cylinder:

A. First install the inflator on the raft, then install the cylinder

B. First install the inflator onto the cylinder, then install the cylinder and inflator on the raft

C. Either of the 2 methods shown above are acceptable

D. None of the above

Question Title

2. The raft knife is installed on the same lifeline as the mooring line.

True

False

Question Title

3. The 3 MOM600 sea anchors are folded up and secured with what?

A. Masking tape

B. Duct tape

C. Water-soluble tape

D. Any of the above

E. None of the above

Question Title

4. The MOM600 Folding Procedure is drawing S-3621.

True

False

Question Title

5. If the MOM600 raft includes a pylon,

A. The pylon inflator must be rigged to the floor graspline

B. The pylon must pass between the lifeline and the raft

C. The pylon must not pass under the floor graspline

D. All of the above

Question Title

6. When folding the MOM600 raft, the sea anchors must be positioned so that they are not folded.

True

False

Question Title

7. When placing the MOM600 into the vacuum bag,

A. Check that the auto-inflator is oriented to the vacuum bag pull tab

B. Check that the end of the mooring line is located next to the auto-inflator

C. Check that the auto-inflator pull tab is accessible

D. Check that a desiccant pack is next to the auto-inflator

E. Nothing other than raft fabric is on top of or under the raft cylinder

F. All of the above

Question Title

8. 1. What is the size of the MOM600 packing fixture?

A. 12” x 12”

B. 16” x 16”

C. 24” x 24”

D. None of the above

Question Title

9. How much air is removed from the vacuum bag?

A. The bag should be soft

B. The bag should be rock hard

C. Either of the above

D. None of the above

Question Title

10. When placing the vacuum bag into the MOM600 case,

A. Case stiffeners are place under and on top of the bag

B. The bag pull tab is oriented at the case pull tab

C. A desiccant pack is placed at the bag pull tab

D. All of the above

E. None of the above

Question Title

11. To complete the packing of the MOM600,

A. Securely tie the vacuum bag pull tab to the case pull tab

B. Update the service history label on the case

C. Place a new Next Service Label on the front of the case

D. All of the above

E. None of the above

MOM600 VIDEOS QUIZAssembly, Folding & Packing

Question Title

* 1. To properly install the MOM600 raft cylinder:

Question Title

* 2. The raft knife is installed on the same lifeline as the mooring line.

Question Title

* 3. The 3 MOM600 sea anchors are folded up and secured with what?

Question Title

* 4. The MOM600 Folding Procedure is drawing S-3621.

Question Title

* 5. If the MOM600 raft includes a pylon,

Question Title

* 6. When folding the MOM600 raft, the sea anchors must be positioned so that they are not folded.

Question Title

* 7. When placing the MOM600 into the vacuum bag,

Question Title

* 8. 1. What is the size of the MOM600 packing fixture?

Question Title

* 9. How much air is removed from the vacuum bag?

Question Title

* 10. When placing the vacuum bag into the MOM600 case,

Question Title

* 11. To complete the packing of the MOM600,

Question Title

* 12. Name

MOM600 VIDEOS QUIZ
Assembly, Folding & Packing

1. To properly install the MOM600 raft cylinder:

2. The raft knife is installed on the same lifeline as the mooring line.

3. The 3 MOM600 sea anchors are folded up and secured with what?

4. The MOM600 Folding Procedure is drawing S-3621.

5. If the MOM600 raft includes a pylon,

6. When folding the MOM600 raft, the sea anchors must be positioned so that they are not folded.

7. When placing the MOM600 into the vacuum bag,

8. 1. What is the size of the MOM600 packing fixture?

9. How much air is removed from the vacuum bag?

10. When placing the vacuum bag into the MOM600 case,

11. To complete the packing of the MOM600,

12. Name