Exit

ConceptsNREC 2022 AXIAL Ballot

Question Title

* 1. Please provide your contact information

Name

Company

Email Address

Phone Number

Question Title

* 2. Please apply a value to every item on the ballot (1-10, with 1 being no interest and 10 being critical).

	1	2	3	4	5	6	7	8	9	10
1. Link AXIAL to third party 1D CFD simulation tool to account for secondary flowpaths (injections, extractions, seals, etc.) (Note: multi-year project)	1. Link AXIAL to third party 1D CFD simulation tool to account for secondary flowpaths (injections, extractions, seals, etc.) (Note: multi-year project) 1	1. Link AXIAL to third party 1D CFD simulation tool to account for secondary flowpaths (injections, extractions, seals, etc.) (Note: multi-year project) 2	1. Link AXIAL to third party 1D CFD simulation tool to account for secondary flowpaths (injections, extractions, seals, etc.) (Note: multi-year project) 3	1. Link AXIAL to third party 1D CFD simulation tool to account for secondary flowpaths (injections, extractions, seals, etc.) (Note: multi-year project) 4	1. Link AXIAL to third party 1D CFD simulation tool to account for secondary flowpaths (injections, extractions, seals, etc.) (Note: multi-year project) 5	1. Link AXIAL to third party 1D CFD simulation tool to account for secondary flowpaths (injections, extractions, seals, etc.) (Note: multi-year project) 6	1. Link AXIAL to third party 1D CFD simulation tool to account for secondary flowpaths (injections, extractions, seals, etc.) (Note: multi-year project) 7	1. Link AXIAL to third party 1D CFD simulation tool to account for secondary flowpaths (injections, extractions, seals, etc.) (Note: multi-year project) 8	1. Link AXIAL to third party 1D CFD simulation tool to account for secondary flowpaths (injections, extractions, seals, etc.) (Note: multi-year project) 9	1. Link AXIAL to third party 1D CFD simulation tool to account for secondary flowpaths (injections, extractions, seals, etc.) (Note: multi-year project) 10
2. Add simple data reduction capability for a single stage	2. Add simple data reduction capability for a single stage 1	2. Add simple data reduction capability for a single stage 2	2. Add simple data reduction capability for a single stage 3	2. Add simple data reduction capability for a single stage 4	2. Add simple data reduction capability for a single stage 5	2. Add simple data reduction capability for a single stage 6	2. Add simple data reduction capability for a single stage 7	2. Add simple data reduction capability for a single stage 8	2. Add simple data reduction capability for a single stage 9	2. Add simple data reduction capability for a single stage 10
3. Create template-based designs for steam and gas turbines (e.g. Curtis stages, PRtt modes, variations in delta enthalpy and radii)	3. Create template-based designs for steam and gas turbines (e.g. Curtis stages, PRtt modes, variations in delta enthalpy and radii) 1	3. Create template-based designs for steam and gas turbines (e.g. Curtis stages, PRtt modes, variations in delta enthalpy and radii) 2	3. Create template-based designs for steam and gas turbines (e.g. Curtis stages, PRtt modes, variations in delta enthalpy and radii) 3	3. Create template-based designs for steam and gas turbines (e.g. Curtis stages, PRtt modes, variations in delta enthalpy and radii) 4	3. Create template-based designs for steam and gas turbines (e.g. Curtis stages, PRtt modes, variations in delta enthalpy and radii) 5	3. Create template-based designs for steam and gas turbines (e.g. Curtis stages, PRtt modes, variations in delta enthalpy and radii) 6	3. Create template-based designs for steam and gas turbines (e.g. Curtis stages, PRtt modes, variations in delta enthalpy and radii) 7	3. Create template-based designs for steam and gas turbines (e.g. Curtis stages, PRtt modes, variations in delta enthalpy and radii) 8	3. Create template-based designs for steam and gas turbines (e.g. Curtis stages, PRtt modes, variations in delta enthalpy and radii) 9	3. Create template-based designs for steam and gas turbines (e.g. Curtis stages, PRtt modes, variations in delta enthalpy and radii) 10
4. Support loss computations for multiple streamlines (Note: multi-year project)	4. Support loss computations for multiple streamlines (Note: multi-year project) 1	4. Support loss computations for multiple streamlines (Note: multi-year project) 2	4. Support loss computations for multiple streamlines (Note: multi-year project) 3	4. Support loss computations for multiple streamlines (Note: multi-year project) 4	4. Support loss computations for multiple streamlines (Note: multi-year project) 5	4. Support loss computations for multiple streamlines (Note: multi-year project) 6	4. Support loss computations for multiple streamlines (Note: multi-year project) 7	4. Support loss computations for multiple streamlines (Note: multi-year project) 8	4. Support loss computations for multiple streamlines (Note: multi-year project) 9	4. Support loss computations for multiple streamlines (Note: multi-year project) 10
5. Add ability to interpolate intermediate stages input data between 1st and last user-specified stage in multistage configuration (e.g. for reactions, PR, geometry)	5. Add ability to interpolate intermediate stages input data between 1st and last user-specified stage in multistage configuration (e.g. for reactions, PR, geometry) 1	5. Add ability to interpolate intermediate stages input data between 1st and last user-specified stage in multistage configuration (e.g. for reactions, PR, geometry) 2	5. Add ability to interpolate intermediate stages input data between 1st and last user-specified stage in multistage configuration (e.g. for reactions, PR, geometry) 3	5. Add ability to interpolate intermediate stages input data between 1st and last user-specified stage in multistage configuration (e.g. for reactions, PR, geometry) 4	5. Add ability to interpolate intermediate stages input data between 1st and last user-specified stage in multistage configuration (e.g. for reactions, PR, geometry) 5	5. Add ability to interpolate intermediate stages input data between 1st and last user-specified stage in multistage configuration (e.g. for reactions, PR, geometry) 6	5. Add ability to interpolate intermediate stages input data between 1st and last user-specified stage in multistage configuration (e.g. for reactions, PR, geometry) 7	5. Add ability to interpolate intermediate stages input data between 1st and last user-specified stage in multistage configuration (e.g. for reactions, PR, geometry) 8	5. Add ability to interpolate intermediate stages input data between 1st and last user-specified stage in multistage configuration (e.g. for reactions, PR, geometry) 9	5. Add ability to interpolate intermediate stages input data between 1st and last user-specified stage in multistage configuration (e.g. for reactions, PR, geometry) 10
6. Add balance disk evaluations	6. Add balance disk evaluations 1	6. Add balance disk evaluations 2	6. Add balance disk evaluations 3	6. Add balance disk evaluations 4	6. Add balance disk evaluations 5	6. Add balance disk evaluations 6	6. Add balance disk evaluations 7	6. Add balance disk evaluations 8	6. Add balance disk evaluations 9	6. Add balance disk evaluations 10
7. Add TE sizing in preliminary design mode for the specified TE cooling extraction	7. Add TE sizing in preliminary design mode for the specified TE cooling extraction 1	7. Add TE sizing in preliminary design mode for the specified TE cooling extraction 2	7. Add TE sizing in preliminary design mode for the specified TE cooling extraction 3	7. Add TE sizing in preliminary design mode for the specified TE cooling extraction 4	7. Add TE sizing in preliminary design mode for the specified TE cooling extraction 5	7. Add TE sizing in preliminary design mode for the specified TE cooling extraction 6	7. Add TE sizing in preliminary design mode for the specified TE cooling extraction 7	7. Add TE sizing in preliminary design mode for the specified TE cooling extraction 8	7. Add TE sizing in preliminary design mode for the specified TE cooling extraction 9	7. Add TE sizing in preliminary design mode for the specified TE cooling extraction 10
8. Adding pre-swirl effect at coolant flow source in flow-driven mode	8. Adding pre-swirl effect at coolant flow source in flow-driven mode 1	8. Adding pre-swirl effect at coolant flow source in flow-driven mode 2	8. Adding pre-swirl effect at coolant flow source in flow-driven mode 3	8. Adding pre-swirl effect at coolant flow source in flow-driven mode 4	8. Adding pre-swirl effect at coolant flow source in flow-driven mode 5	8. Adding pre-swirl effect at coolant flow source in flow-driven mode 6	8. Adding pre-swirl effect at coolant flow source in flow-driven mode 7	8. Adding pre-swirl effect at coolant flow source in flow-driven mode 8	8. Adding pre-swirl effect at coolant flow source in flow-driven mode 9	8. Adding pre-swirl effect at coolant flow source in flow-driven mode 10
9. Add evaluation of AN2 and Urim limits based on material properties	9. Add evaluation of AN2 and Urim limits based on material properties 1	9. Add evaluation of AN2 and Urim limits based on material properties 2	9. Add evaluation of AN2 and Urim limits based on material properties 3	9. Add evaluation of AN2 and Urim limits based on material properties 4	9. Add evaluation of AN2 and Urim limits based on material properties 5	9. Add evaluation of AN2 and Urim limits based on material properties 6	9. Add evaluation of AN2 and Urim limits based on material properties 7	9. Add evaluation of AN2 and Urim limits based on material properties 8	9. Add evaluation of AN2 and Urim limits based on material properties 9	9. Add evaluation of AN2 and Urim limits based on material properties 10
10. Update models for annular diffusers, hoods, and collectors	10. Update models for annular diffusers, hoods, and collectors 1	10. Update models for annular diffusers, hoods, and collectors 2	10. Update models for annular diffusers, hoods, and collectors 3	10. Update models for annular diffusers, hoods, and collectors 4	10. Update models for annular diffusers, hoods, and collectors 5	10. Update models for annular diffusers, hoods, and collectors 6	10. Update models for annular diffusers, hoods, and collectors 7	10. Update models for annular diffusers, hoods, and collectors 8	10. Update models for annular diffusers, hoods, and collectors 9	10. Update models for annular diffusers, hoods, and collectors 10
11. Add compressors to the blade repository	11. Add compressors to the blade repository 1	11. Add compressors to the blade repository 2	11. Add compressors to the blade repository 3	11. Add compressors to the blade repository 4	11. Add compressors to the blade repository 5	11. Add compressors to the blade repository 6	11. Add compressors to the blade repository 7	11. Add compressors to the blade repository 8	11. Add compressors to the blade repository 9	11. Add compressors to the blade repository 10
12. Have AXIAL provide design based on desired location on Smith chart	12. Have AXIAL provide design based on desired location on Smith chart 1	12. Have AXIAL provide design based on desired location on Smith chart 2	12. Have AXIAL provide design based on desired location on Smith chart 3	12. Have AXIAL provide design based on desired location on Smith chart 4	12. Have AXIAL provide design based on desired location on Smith chart 5	12. Have AXIAL provide design based on desired location on Smith chart 6	12. Have AXIAL provide design based on desired location on Smith chart 7	12. Have AXIAL provide design based on desired location on Smith chart 8	12. Have AXIAL provide design based on desired location on Smith chart 9	12. Have AXIAL provide design based on desired location on Smith chart 10

Please list up to two write-in items in the space below:

Question Title

* 3. Please rate the technical capability of this product:

1 Completely Unsatisfactory

2 Somewhat Useful But Needs Significant Improvement

3 Useful But Needs Improvement

4 Very Useful But Needs Minor Improvement

5 Completely Satisfactory

Or, put your own comments here:

Question Title

* 4. Please rate the technical support of this product:

1 Completely Unsatisfactory

2 Somewhat Useful But Needs Significant Improvement

3 Useful But Needs Improvement

4 Very Useful But Needs Minor Improvement

5 Completely Satisfactory

Or, put your own comments here:

Question Title

* 5. Would you recommend this product to a colleague?

Yes