Construction and Demolition Waste Survey

Question Title

1. Do you think construction & demolition waste is a big issue in the Queenstown Lakes district?

Yes

I don't know

Question Title

2. Do you currently separate used or excess building site materials for REUSE?

Always

Most of the time

Some of the time

I don't reuse materials

Not applicable

Question Title

3. Do you currently separate used or excess building site materials for RECYCLING?

Always

Most of the time

Some of the time

I don't reuse materials

Not applicable

Question Title

4. Do you or your company work to a Site Specific Waste Management Plan?

Yes

Sometimes

Not applicable

Question Title

5. In your opinion, do architectural practices currently take into consideration material performance or how is it disposed of?

Always

Never

Sometimes

Not applicable

Question Title

6. When sourcing materials do you consider its end of life (i.e. chose long-lasting, recyclable or reusable materials)

Always

Never

Sometimes

Not applicable

Question Title

7. How does the product stewardship efforts of your building retailer/supplier/manufacturer/importer influence your purchasing decisions? (i.e reduced single-use packaging, reusable/returnable packaging, take back schemes)

A great deal

A lot

Moderately

A little

Not at all

Question Title

8. What are the main barriers builders face when minimising waste or diverting it from the landfill?

Cost of diverting waste

Lack of diversion knowledge and education

Lack of legislation to drive waste minimisation and support reuse

Time constraints

Lack of standardised collection systems

Lack of resource recovery centres

Lack of financial incentives within contract negotiations

Lack of space to separate materials on site

Lack of consideration during design stage

Other (please specify)

Question Title

9. Please rate materials according to ease of RECYCLING

	Easy	Medium	Difficult
Concrete/Masonry	Concrete/Masonry Easy	Concrete/Masonry Medium	Concrete/Masonry Difficult
Metals	Metals Easy	Metals Medium	Metals Difficult
Plastics packaging (i.e wraps around timber, polystyrene)	Plastics packaging (i.e wraps around timber, polystyrene) Easy	Plastics packaging (i.e wraps around timber, polystyrene) Medium	Plastics packaging (i.e wraps around timber, polystyrene) Difficult
Plasterboard	Plasterboard Easy	Plasterboard Medium	Plasterboard Difficult
Untreated wood	Untreated wood Easy	Untreated wood Medium	Untreated wood Difficult
Treated wood	Treated wood Easy	Treated wood Medium	Treated wood Difficult
Plastic building materials (ie pipes)	Plastic building materials (ie pipes) Easy	Plastic building materials (ie pipes) Medium	Plastic building materials (ie pipes) Difficult

Question Title

10. Please rate materials according to ease of REUSE.

	Easy	Medium	Difficult	Don't know
Concrete/Masonry	Concrete/Masonry Easy	Concrete/Masonry Medium	Concrete/Masonry Difficult	Concrete/Masonry Don't know
Metals	Metals Easy	Metals Medium	Metals Difficult	Metals Don't know
Plastics	Plastics Easy	Plastics Medium	Plastics Difficult	Plastics Don't know
Plasterboard	Plasterboard Easy	Plasterboard Medium	Plasterboard Difficult	Plasterboard Don't know
Untreated wood	Untreated wood Easy	Untreated wood Medium	Untreated wood Difficult	Untreated wood Don't know
Treated wood	Treated wood Easy	Treated wood Medium	Treated wood Difficult	Treated wood Don't know
Glass (window)	Glass (window) Easy	Glass (window) Medium	Glass (window) Difficult	Glass (window) Don't know

Question Title

11. In your opinion, what would encourage builders to minimise waste or divert waste from landfill?

Increased waste levy at transfer stations or landfill

Education on waste segregation and minimisation

Peer to peer excess material exchange (i.e. App)

Take back arrangements with suppliers (i.e packaging or excess)

A central material holding area where materials can be exchanged/repurposed/reused

Demand from clients

Access to local facilities which can process a range of building waste for reuse and recycling (i.e Resource Recovery Centre)

Other (please specify)

Question Title

12. In your opinion, what would encourage building companies to set up a specific waste minimisation plan for their site?

Contract incentives i.e money back based on waste diversion percentage

Make the site-specific waste management plan mandatory as part of building consent

Infrastructure & collection: more options to repurpose/reuse/recycle in the district

A larger laydown area for storage

Assistance with the development of a Site Specific Waste Management Plan

Better local infrastructure and increased options to reuse, repurpose or recycle

Other (please specify)

Question Title

13. What do you think the designer/architect's role is in minimising waste on a project?

The client has to drive it, it should be part of the design brief

Right at the beginning: at the planning or design stage

During building contract stage: communication with builder and suppliers

Other (please specify)

Question Title

14. Which of the following best describes your role?

I’m a builder

I’m a tradesperson

I’m an architect or designer

I’m an engineer

I’m currently building or thinking of building

I’m a developer

I’m a supplier

I’m a homeowner

Other (please specify)

Question Title

15. Where are you located or where does your company operate from?

Wakatipu (Queenstown, Glenorchy, Frankton, Kingston, Arrowtown)

Upper Clutha (Wānaka, Hāwea, Cardrona)

Other (please specify)

Question Title

16. The Building Better Group is hosting a series of workshops around the Queenstown Lakes District on ways to minimise construction waste. Would you be interested in participating?

Yes

Construction and Demolition Waste Survey

Question Title

* 1. Do you think construction & demolition waste is a big issue in the Queenstown Lakes district?

Question Title

* 2. Do you currently separate used or excess building site materials for REUSE?

Question Title

* 3. Do you currently separate used or excess building site materials for RECYCLING?

Question Title

* 4. Do you or your company work to a Site Specific Waste Management Plan?

Question Title

* 5. In your opinion, do architectural practices currently take into consideration material performance or how is it disposed of?

Question Title

* 6. When sourcing materials do you consider its end of life (i.e. chose long-lasting, recyclable or reusable materials)

Question Title

* 7. How does the product stewardship efforts of your building retailer/supplier/manufacturer/importer influence your purchasing decisions? (i.e reduced single-use packaging, reusable/returnable packaging, take back schemes)

Question Title

* 8. What are the main barriers builders face when minimising waste or diverting it from the landfill?

Question Title

* 9. Please rate materials according to ease of RECYCLING

Question Title

* 10. Please rate materials according to ease of REUSE.

Question Title

* 11. In your opinion, what would encourage builders to minimise waste or divert waste from landfill?

Question Title

* 12. In your opinion, what would encourage building companies to set up a specific waste minimisation plan for their site?

Question Title

* 13. What do you think the designer/architect's role is in minimising waste on a project?

Question Title

* 14. Which of the following best describes your role?

Question Title

* 15. Where are you located or where does your company operate from?

Question Title

* 16. The Building Better Group is hosting a series of workshops around the Queenstown Lakes District on ways to minimise construction waste. Would you be interested in participating?

Question Title

* 17. If you would like to be informed about Better Building workshops, events and projects, please enter your email address

1. Do you think construction & demolition waste is a big issue in the Queenstown Lakes district?

2. Do you currently separate used or excess building site materials for REUSE?

3. Do you currently separate used or excess building site materials for RECYCLING?

4. Do you or your company work to a Site Specific Waste Management Plan?

5. In your opinion, do architectural practices currently take into consideration material performance or how is it disposed of?

6. When sourcing materials do you consider its end of life (i.e. chose long-lasting, recyclable or reusable materials)

7. How does the product stewardship efforts of your building retailer/supplier/manufacturer/importer influence your purchasing decisions? (i.e reduced single-use packaging, reusable/returnable packaging, take back schemes)

8. What are the main barriers builders face when minimising waste or diverting it from the landfill?

9. Please rate materials according to ease of RECYCLING

10. Please rate materials according to ease of REUSE.

11. In your opinion, what would encourage builders to minimise waste or divert waste from landfill?

12. In your opinion, what would encourage building companies to set up a specific waste minimisation plan for their site?

13. What do you think the designer/architect's role is in minimising waste on a project?

14. Which of the following best describes your role?

15. Where are you located or where does your company operate from?

16. The Building Better Group is hosting a series of workshops around the Queenstown Lakes District on ways to minimise construction waste. Would you be interested in participating?

17. If you would like to be informed about Better Building workshops, events and projects, please enter your email address