Module 4 - Scaffold Quiz

1. Competent Person Duties / Proper Setup and Use

 
A correct response rate of 80% or greater is required to pass this quiz. Feel free to use the Wiki pages or any other printed or online resource to find your answers. You can take this quiz as many times as necessary during the 2 week course duration.
*
1. What is your name?
2. Each scaffold and component must be able to support without failure its own weight and at least _____ times the maximum intended load applied?
3. Fall protection is required when working ______ feet or greater from scaffolds?
4. Is cross bracing allowed to be used as part of the guardrail system?
5. Must scaffold platforms be fully planked with only minimal gaps (1 inch) allowed for the uprights to pass through?
6. To best access the working level, it is acceptable to climb the scaffold framework or use the crossbars as a ladder.
7. What methods can be used to prevent objects from falling from the scaffold platforms on to employees working below.
8. Scaffolds shall be erected, moved, dismantled, or altered only under the supervision and direction of a __________ ____________ .
9. What must be done before a employee is allowed to work from a mobile (rolling or baker style) scaffold?
10. Mobile scaffolds can be moved while occupied?
11. All employees who work on a scaffold must be _______ by a person qualified to recognize the hazards associated with the type of scaffold used and to understand the procedures to control and minimize those hazards.
12. Electrical Hazards, such as proximity to overhead power lines, must be identified when erecting or working from scaffolds. At a minimum, you must keep at least _________ feet separation between the scaffold, or any other object, and power lines.
Powered by SurveyMonkey
Check out our sample surveys and create your own now!